| Customization: | Available |
|---|---|
| After-sales Service: | Online Support |
| Warranty: | 12 Months |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The shell and tube heat exchanger is composed of shell, heat transfer tube bundle, tube sheet, baffle (baffle) and tube box and other components. The shell is mostly cylindrical, with a tube bundle inside, and the two ends of the tube bundle are fixed on the tube sheet. There are two kinds of hot and cold fluids for heat exchange, one flows inside the tube, called tube-side fluid; the other flows outside the tube, called shell-side fluid. In order to improve the heat transfer partial coefficient of the fluid outside the tube, several baffles are usually installed in the shell. The baffle can increase the velocity of the shell-side fluid, forcing the fluid to pass through the tube bundle multiple times according to the specified distance, and enhance the degree of fluid turbulence. The heat exchange tubes can be arranged in equilateral triangles or squares on the tube sheet. The arrangement of equilateral triangles is more compact, the degree of turbulence of the fluid outside the tube is high, and the heat transfer coefficient is large; the arrangement of squares makes it easy to clean the outside of the tube, and is suitable for fluids that are prone to fouling.
Every time the fluid passes through the tube bundle is called a tube pass; every time the fluid passes through the shell is called a shell pass. The picture shows the simplest single-shell-side single-tube heat exchanger, referred to as 1-1 type heat exchanger. In order to increase the velocity of the fluid in the tube, dividers can be installed in the tube boxes at both ends to divide all the tubes into several groups. In this way, the fluid only passes through part of the tubes at a time, so it goes back and forth multiple times in the tube bundle, which is called multi-tube pass. Similarly, in order to increase the flow rate outside the tube, longitudinal baffles can also be installed in the shell to force the fluid to pass through the shell space multiple times, which is called multi-shell pass. Multi-tube and multi-shell can be used together.
Because the temperature of the fluid inside and outside the tube is different in the shell-and-tube heat exchanger, the temperature of the shell and the tube bundle of the heat exchanger is also different. If there is a large difference between the two temperatures, a large thermal stress will be generated in the heat exchanger, causing the tube to bend, break, or pull off the tube sheet. Therefore, when the temperature difference between the tube bundle and the shell exceeds 50°C, appropriate compensation measures should be taken to eliminate or reduce thermal stress.
According to the compensation measures adopted, shell and tube heat exchangers can be divided into the following main types:
1. The tube sheets at both ends of the tube bundle of the fixed tube-sheet heat exchanger are integrated with the shell. The structure is simple, but it is only suitable for heat exchange operations when the temperature difference between the hot and cold fluids is not large and the shell side does not need mechanical cleaning. When the temperature difference is slightly large and the shell side pressure is not too high, an elastic compensation ring can be installed on the shell to reduce thermal stress.
2. The tube plate at one end of the tube bundle of the floating head heat exchanger can float freely, completely eliminating thermal stress; and the whole tube bundle can be pulled out from the shell, which is convenient for mechanical cleaning and maintenance. Floating head heat exchangers are widely used, but the structure is more complicated and the cost is higher.3. U-shaped tube heat exchanger
Each heat exchange tube is bent into a U shape, and the two ends are respectively fixed on the upper and lower areas of the same tube plate. This kind of heat exchanger completely eliminates thermal stress, and its structure is simpler than that of the floating head type, but the tube side is not easy to clean.
4. Stuffing box heat exchanger
The structural feature of the stuffing box heat exchanger is that only one end of the tube sheet is fixedly connected to the shell, and the other end is sealed with a stuffing box. The tube bundle can expand and contract freely, and there will be no temperature difference stress caused by the temperature difference between the shell wall and the tube wall. The advantage of the stuffing box heat exchanger is that it is simpler in structure than the floating head heat exchanger, easy to manufacture, less consumables, and low in cost; the tube bundle can be drawn out from the shell, and both inside and between the tubes can be cleaned, and it is easy to maintain. Its disadvantage is that the pressure resistance of the stuffing box is not high, generally less than 4.0MPa; the shell-side medium may leak through the stuffing box, which is not suitable for flammable, explosive, toxic and valuable media. The stuffing box heat exchanger is suitable for the occasions where the temperature difference between the tube and the shell wall is large or the medium is easy to scale, and needs to be cleaned frequently and the pressure is not high.
5. Kettle heat exchanger
The structural feature of the kettle heat exchanger is that an appropriate evaporation space is set on the upper part of the shell, and it also functions as a steam chamber. Tube bundles can be fixed tubesheet, floating head or U-tube. The kettle heat exchanger is easy to clean and maintain, can handle unclean and easily fouled media, and can withstand high temperature and high pressure. It is suitable for liquid-vapor heat exchange and can be used as a waste heat boiler with the simplest structure.
Features of shell and tube heat exchanger:
1. High efficiency and energy saving, the heat transfer coefficient of the heat exchanger is 6000-8000W/m2.0C.
2. Made of stainless steel, the service life is long, up to more than 20 years.
3. Changing laminar flow to turbulent flow improves heat transfer efficiency and reduces thermal resistance.
4. Fast heat exchange, high temperature resistance (400°C), high pressure resistance (2.5Mpa).
5. Compact structure, small footprint, light weight, easy installation, saving civil construction investment.
6. Flexible design, complete specifications, practical and targeted, saving money.
7. Wide range of application conditions, suitable for large pressure, temperature range and heat exchange of various media.
8. Low maintenance cost, easy operation, long descaling cycle and convenient cleaning.
9. Using nano-thermal film technology, the heat transfer coefficient is significantly increased.
10. The application field is wide, and can be widely used in thermal power, factories and mines, petrochemical industry, urban central heating, food and medicine, energy electronics, machinery and light industry and other fields.
11. The heat transfer tube adopts copper tube with rolled fins on the outer surface, which has high thermal conductivity and large heat transfer area.
12. The deflector guides the shell-side fluid to flow continuously in a broken line in the heat exchanger. The distance between the deflectors can be adjusted according to the optimal flow rate. The structure is firm and can meet the shell-side fluid with large flow rate or even super large flow rate and high pulsation frequency. heat exchange.
13. When the shell side fluid is oil, it is suitable for heat exchange with low viscosity and cleaner oil.
* Skill support(3D models drawing).
* Sample testing support.
* View our Factory.
* Warranty period: 18 months
* Engineers available to service machinery overseas.
* Free parts
We specialize in designing, manufacturing and exporting refrigeration equipments for the varied industries since 2004.
When it comes to building heat exchanger for any application VRCOOLERTECH Company has the capability to meet your requirements. If you need a heat exchanger using water, steam, refrigerant, glycol, ammonia, CO2 or any other medium, Vrcoolertech Company can build it for you. We build heat exchanger for replacement of existing heat exchanger or for new jobs, as well. We make standard copper tube / aluminum fin commercial heat exchanger and we build heavy industrial heat exchanger for process applications. You will be hard-pressed to come up with a job we can't handle.
Our main products:
Commercial heat exchanger
Industrial heat exchanger
Dry cooler
Unit cooler
Charge air cooler
Compressor cooler(intercooler, aftercooler, oil cooler)
Shell and tube heat exchanger
Q1: What is your strength ?
A: Design and manufacture.
Q2: How long is your delivery time?
A:Different products' production time is different. Generally, it needs 10 to 40 working days.
Q3: What is your terms of payment ?
A:50% TT deposit in advance, 50% TT balance before delivery.
Q4: Any other products except air compressor cooler ?
A: Yes.
Our 3 main products are: Condenser and Evapotator, Industrial air cooler and Unit cooler and Coil.
Q5. How to contact with you ?
A: 24hours online from TradeManager, quick answer, or email with us, wechat, skype, whatsapp is available.
Select one product and leave message to us.
){kind=link}