Vertical Dry Cooler Air Cooled Condenser for Food Industry

Product Description

Product Description

A dry cooler is a type of heat exchanger that is used for cooling a fluid, usually water or glycol, without the use of a cooling tower or other external source of water. Dry coolers are often used in industrial or commercial applications where the use of a cooling tower is not practical or feasible, such as in remote locations or in areas where water is scarce.

 

Optional features:
EC variable speed fan motor-- save lot of energy
ZAplus/ Axi Top for greater volume flow and extreme silence
Adiabatic system significantly reduce energy consumption in summer
Epoxy coated or Hydrophilic aluminum fin suitable for coastal or high corrosion area
Fluid dry cooler
Clean stainless steel tube and aluminum fin coil for cooling deionized water

Product Application

1. Dry Air Cooler for Immersion Cooling Tank

Provide a reliable, low energy and safe air cooled heat exchanger for the cooling of immersion bath.

Fluid to be cooled is dielectric coolant manufactured by Engineered Fluids.

 

High quality and reliable Vrcooler fluid cooler with redundant fans to keep the bath cool in a safe and consistent manner

2. Dry Cooler in Milk Cooling System, Replace a Water Chiller

Milk cooling is an important part of the production process of the ranch. The plate heat exchanger is the place where the milk is cooled.

Through efficient heat exchange, there is no need to worry about mixing the cooling medium into the milk.

VRcooler provides solutions for milk cooling, as shown in the picture below:

3. Dry Cooling System in Diesel Generator Set Cooling, Replace Cooling Tower

In a power plant, the largest use of water is in the cooling system, as a lot of heat must be removed to condense the steam used to drive the turbine generator.

Historically, cooling was provided by water sources - rivers and lakes, but now, water conservation is a priority for power generation companies. More and more power plants are using.

Cooling method: The water in the Dry Cooling System uses a heat exchanger to cool the circulating water or oil inside the generator.

Food industry: Dry coolers are used in the food industry to cool food products and ingredients during production and to maintain temperatures in storage facilities. They are commonly used in dairy processing, meat processing, and in the production of baked goods.

Oil and gas industry: Dry coolers are used in the oil and gas industry to cool various process fluids, such as crude oil, condensate, and natural gas. They are used in refining and petrochemical processing, as well as in upstream oil and gas operations.

Agriculture: Dry coolers are used in agriculture for crop cooling and storage. They are used to cool and maintain the quality of fruits, vegetables, and other perishable agricultural products.

 

Solar energy: Dry coolers are used in concentrated solar power (CSP) plants to cool the thermal fluid used in the heat transfer process.

Mining industry: Dry coolers are used in the mining industry to cool process fluids, such as water and glycol, used in the mining process. They are also used to cool air in underground mining operations.

Medical and pharmaceutical industry: Dry coolers are used in the medical and pharmaceutical industry to cool equipment and products, such as medical lasers and vaccines, which require stable and precise temperatures.

 

Plastics industry: Dry coolers are used in the plastics industry to cool molten plastics, such as in the extrusion and injection molding processes. They help maintain consistent temperatures and improve the quality of the finished product.

Water treatment: Dry coolers are used in water treatment plants to cool water before it enters the treatment process. They are also used to cool water in recirculating systems used in water treatment and wastewater treatment.

Pulp and paper industry: Dry coolers are used in the pulp and paper industry for cooling process fluids, such as water and chemicals used in the papermaking process. They are also used to cool air in paper mills to improve air quality.

Paint and coatings industry: Dry coolers are used in the paint and coatings industry to cool solvent and water-based coatings during manufacturing.

 

Renewable energy: Dry coolers are used in various renewable energy applications, such as cooling geothermal and solar power plants. They are also used in cooling wind turbines to maintain optimal operating temperatures.

Gas compression: Dry coolers are used in gas compression facilities to cool the compressed gas, such as in natural gas compressor stations and air compressor systems.

Chemical plants: Dry coolers are used in chemical plants for various cooling applications, such as cooling reactor vessels and distillation columns.

Our Advantages

 

 

Company Profile

VRCOOLERTECH CST Company

We specialize in designing, manufacturing and exporting refrigeration equipments for the varied industries since 2004.

When it comes to building heat exchanger for any application VRCOOLERTECH CST Company has the capability to meet your requirements. If you need a heat exchanger using water, steam, refrigerant, glycol, ammonia, CO2 or any other medium, CST Company can build it for you. We build heat exchanger for replacement of existing heat exchanger or for new jobs, as well. We make standard copper tube / aluminum fin commercial heat exchanger and we build heavy industrial heat exchanger for process applications. You will be hard-pressed to come up with a job we can't handle.

Changzhou Vrcooler Refrigeration Co.,Ltd is the professional design and manufacturer of various specifications of the 
condenser,evaporator, radiator, unit air cooler, heat exchanger production enterprises, with a strong refrigeration and thermal technology professional R &D Team.

Test Report & Certifications
Leak test report:Before package, we will do the pressure test in the pool to check if the product leak. (Process: Connect the inlet/outlet of the product to the tube s then put nitrogen in it, and put the product in water. If there is no bubbling, there is no leak.)
Pressure Test Report:Under the pressure test, this product has no leakage; no visible abnormal deformation; no abnormal noise; the test conclusion is qualified.

ISO 9001 Certifications

FAQ

Q1: What is your strength ?
A: Design and manufacture.

Q2: How long is your delivery time?
A:Different products' production time is different. Generally, it needs 10 to 40 working days.

Q3: What is your terms of payment ?
A:50% TT deposit in advance, 50% TT balance before delivery.

Q4: Any other products except dry air cooler ?
A: Yes.
Our 3 main products are: Condenser and Evapotator, Industrial air cooler and Unit cooler and Coil.

Q5. How to contact with you ?
A: 24hours online from TradeManager, quick answer, or email with us, wechat, skype, whatsapp is available.

Select one product and leave message to us.